180W, 12V 15A Customized Power Supply

• Output Type: Single
• Warranty: 2 Years
• Output Power: 101 - 200W
• Input Voltage: 90-286VAC / 130-400VDC
• Certification: CE, RoHS, CCC, CB, FCC
• Brand: Goldpower
• Model NO.: PPC12 A020B
• Transport Package: Carton
• Trademark: Goldpower
• Origin: China
• HS Code: 8504401400

Product Description

Welcome to use PPC12A020B customized power supply from Shenzhen Gold Power.The power supply normally works with 90~286Vac or 130~400Vdc,and 12V oneway output. The power supply is equiped with protections against input over-current,input over/under-voltage and input reverse connection prevention.Remote signal function is also provided.The power supply is designed strictly in accordance with the safety regulations,which conforms to the safety standards and requirements of information technological equipment.

1.Specification

Environmental requirements
Parameter	Min.	Typ.	Max.	Unit	Remark
Operating temperature	-30	25	65	ºC
Nominal operating temperature	-25	25	55	ºC	Safety rule certificated range
Relative humidity	5		95	%	Long-term operation,no condensing
Altitude	0		5000	m	Max operating temperature will be derated by 1ºC per 200m @ altitude obove 3000m.
Cooling	Forced cooling by fan.
Working time	Continuously work for 24 hrs everyday.

Remark :The location of power supply in outdoor cabinet is as below
 (power supply in the figure is an example)

Power suppply

Storage requirements
Parameter	Min.	Typ.	Max.	Unit	Remark
Storage temperature	-40	25	85	ºC
Relative humidity	5		95	%
Altitude	0		5000	m
Max temperature variation rate			3	ºC/min

 

AC input
Parameter	Min.	Typ.	Max.	Unit	Remark
Nominal input voltage	100	110/220	240	Vac	Nameplate nominal voltage,within which safety rule certificated.
Input operating voltage range	90	110/220	286	Vac	Regular work
	130	240	400	Vdc	Regular work,no certification requirement. Remark 1
Max input voltage			315	Vac	Inoperation under this voltage is allowed, but no damage with the power supply
AC input frequency	45	50/60	66	Hz
Power factor		0.95			Normal temperature rated input/output
Input inrush current				A	Test @ normal temperature, rated input/output,cold start. Meet the standard of ETSI300132, Remark2
Input current			2.8	A	Test @ nominal min. input voltage,rated/max output current
Input reverse connection prevention	The power supply can work properly @ reverse connection,with fuses @ L,N
Grounding	AC PE on the front panel connects with the enclosure of power supply,which connecting with system grounding through the grounding screw.

Remark 1:EMC test @ rated input 110 Vac and 220 Vac,rated output voltage,system max configuration load current
Remark 2:ETSI300132 requirement for input inrush current












 

Output   (figure 1)
Parameter		Min.	Typ.	Max.	Unit	Remark
Rated output voltage			12		Vdc	Test @ the connection part of output terminal and PCB.
Output voltage setting value		11.6	12	12.4	Vdc	Rated input voltage,output half-load. Test @ output terminal.
Output current				15	A	Full-power output @ fan >1.5m/s; Output >=130W when 1.0m/s <= fan speed<1.5m/s .
Output rated power				180	W
Output voltage range		11.6		12.4	Vdc	All input/output load
Ripple (Vp-p)				120	mV	20MHz bandwidth, Test with a 0.1uF electrolytic capacitor and 10uF capacitor
efficiency	220V	83			%	Normal temperature,220Vac input, 25% load
		87				Normal temperature,220Vac input, loads more than 50%(50%,75% and 100%)
	110V	81				Normal temperature,110Vac input, 25% load
		85				Normal temperature,110Vac input, loads more than 50%(50%,75% and 100%)
	240V	85				Normal temperature,240Vdc input, loads more than 50%(50%,75% and 100%)
Transient response recovery time				200	us	Load variation:25%~50%~25%or 50%~75%~50%,rate:0.1A/uS.
Transient response overshoot		-5		+5	%
Startup output delay				4	s	Rated input/output
Startup/shutdown overshoot		-5		+5	%
Output voltage rise-up time		1		50	ms	Startup @ rated input & full-load output, the duration for 12V output voltage rising from 10% to 90% in monotonically increasing wave.
Capacitive load		4000			uF	Common aluminum electrolytic capacitor
Temperature coefficient		-0.02		+0.02	%/ºC	The difference between DC output voltage and DC output setting voltage should be no more than the DC output setting voltage ± 0.02%.
Delay @ power failure		5			mS	Test @ 220VAC rated(220Vac±20%) full-load,please refer to the remote signal function description for details.
Output common GND		12VGND and PE independent.

 

Protections
Parameter	Min.	Typ.	Max.	Unit	Remark
Input over-current protection	With input over-current protection function.Fusing @ over-current,but components of the power supply shall not be damaged. Enable double livewires input,fuse protection shall be set @ L and N.
Input over-voltage protection	291			Vac
Input over-voltage recovery point	286			Vac
Input over-voltage protection hystersis	5			Vac
Input under-voltage protection point			85	Vac	The power supply shall not be damaged when input voltage is below min. operating voltage.
Input under-voltage recovery point			90	Vac
Input under-voltage protection hystersis	5			Vac
Output over-current protection	16.5		22.5	A	Hiccup,auto recoverable after over-current be removed.
Output over-voltage protection	13.2		14.6	A	Hiccup,auto recoverable after over-current be removed. Transient over-voltage protection point<16.8V
Over-temperature protection	The power supply shall not conduct protection and work properly within required temperture range ;The power supply shall automaticlly recover after recovering to normal temperature. There shall be an alarm before over-temperature protection.
Output short-circuit protection	Hiccup,auto recoverable after short-circuit be removed;the power supply shall not be damaged if long-term circuit.
Input reverse connection protection	Fuse protection shall be set @ L and N.

 

EMC requirements
No.	Item	Requirement		Standard
SR-PPC12 A020B-2100	(ESD)	Air discharge:±8KV		EN61000-4-2 (Criterion B)
		Contact discharge:±6KV		EN61000-4-2 (Criterion B)
SR-PPC12 A020B-2101	(RS)	Test frequency:80MHz~800MHz,960MHz~1.4GHz,2.7G~ 6GHz,Electric field intensity:3V/m; Test frequency :800MHz~960MHz,1.4G~2.7GHz,Electric field intensity:10V/m; Amplitude modulation:80%AM(1kHz)		EN61000-4-3 (Criterion A)
SR-PPC12 A020B-2102	(CS)	Test frequency:0.15 MHz~ 80 MHz,Test intensity:3V,Amplitude modulation:80%AM(1kHz)		EN61000-4-6 (Criterion A)
SR-PPC12 A020B-2103	(EFT/B)	±2kV		EN61000-4-4 (Criterion B)
SR-PPC12 A020B-2104	(SURGE)	Basic test:(Remark 3) Line-line:±2.5kV(internal resistance:2Ω);Line-ground:±2.5kV(internal resistance:2Ω) Enhanced test: Line-line:±6kV(interval resistance:2Ω);line-ground:±6kV(internal resitance:2Ω)		EN61000-4-5 Criterion B
SR-PPC12 A020B-2105	SURGE	Input	Line-line:±5kA;Line-ground:±5kA(Remark 3)	Standalone machine test	YD/T 5098-2001 8/20 μs waveform(Criterion C)
			With the system:common mode 15KA/difference mode15KA(5 times for ±)	Test with lightning arrester@ inpu, lightning arrester code : 044070300010
		Output	With the system:Line-line:±5Ka;Line-ground:±5kA	Test with 5KA  lightning arrester @ output, residual voltage< 50V
SR-PPC12 A020B-2106	(DIP)	Dip to 70%Ut,duration:500ms, criterion B; Dip to 0%Ut,duration:10ms,20ms,criterion B; Dip to 0%Ut,duration:5000ms,criterion C.		EN61000-4-11 Ut=220Vac
SR-PPC12 A020B-2107	(CE)	CLASS A(Remark 1)
SR-PPC12 A020B-2108	(RE)	CLASS A(Remark 1)
SR-PPC12 A020B-2109	Current harmonics	Meet the requirement of CLASS A .		IEC61000-3-4
SR-PPC12 A020B-2110	Voltage fluctuation	Pst ≤1.0;P1t ≤0.65; dc≤3%; dmax≤4%; Duration for d(t) >200mS is less than 3%		IEC61000-3-3

Remark1: EMC test shall be conduted @ rated input 110 Vac and 220 Vac,rated output voltage,system max. configuration load current.
Remark2:
Criterion A (for continuity):
a) DC output range shall be accordant to normal work situation during interference;
b) There shall not be alarms and failure indicated at tested unit during or after interference.
Criterion B (for transience):
a) DC output voltage shall not affect CriterionB during the test;
b) Spikes during interference shall not be considered.
c) There shall not be alarm and failure indicated at tested unit during or after interference.
d) Recover to normal function after interference.
Criterion C (for interruption):
The temporary lose of function is allowed, the function shall be recoverable automatically or manually, as well as by operation.
Criterion R (for susceptibility)
There shall not be damage or other interruption upon unit during test, eg, software damage or improper operation of protecting unit. The unit shall operate appropriately within specified range and not necessarily during process of test. The interference may result in actions of fuse or other device defined, and shall be replaced or reset before recovering to normal operation state. 
Remark 3: SPD installed in the power supply, which is with the functions of over-current/heat-tripping, or protection components such as fuse @ circuit.
Remark 4:standalone machine test with pure resistance full-load in the system cabient.Test result shall meet the margin requirements of our company, or meet margin requirement of 6db for test out of our company.
Remark 5: High voltage DC input EMC requirements:
Test voltage:rated input voltage 240 VDC;
Test items:all items(except for DIP and communication for the;
RE and CE Specification prolong 20 db, and satisfy the margin requirement of Remark 4.

 

Others
Items	Requirement	Remark
Odor	No peculiar and deleterious odor
Component	The electric and temperature stress shall meet derating requirement specified by supplier,to ensure components reliability. Max operating temperature of electrolyte capacitor at input/ output side shall be 105ºC.
Proofing requirement	Proofing procedure shall be taken for PCBA of samples and lots. Material :polyurethane;thickness: 25~50um.
ROHS	ROHS5
MTBF	500 thousand hours	25ºC,rated input, full-load output
Lifetime	≥10 years	25ºC,rated input/output current
Salt fog prevetion	Salt fog test, 96H	Standalone machine test . GB/T2423.17.
Vibration	5-9Hz,Amplitude:1.2mm;9-200Hz:acceleration:0.4g;3 axes,5cycles per axe.	Unpacked
Dip	Height :0.10m,sides :S1,S2;corner:C1,C2,1time.	Unpacked
Shock	Frequency Acceleration Spectral Density: 1~4Hz:0.0001~0.01g2/Hz; 4~100Hz: 0.01g2/Hz; 100~200Hz:0. 01~0.001g2/Hz; Root-mean -square acceleration:Grms=1.15g Test axes:3. Duration : 30min per axe.	Packed
bump	Half sine-wave;peak acceleration:30g;pulse width:11ms;directions:6;times: 3times per direction.	Packed
collision	Half sine-wave;peak acceleration:18g;pulse width:6ms;directions:6; times: 100 times per direction.	Packed
Drop	Weight     Height    ≤15kg,   100cm Drop at 1 angle,3 edges and 6 surfaces: 1angle:The weakest angle shall be selected for drop test,otherwise,angle2-3-5 3 edges:edges intersect at obove angle 6 surfaces:external surfaces of package unit times:1 time per surface	Packed

 

Safety & insulation rating
parameter	Standard	Remark
Insulation voltage	Input-output:3000Vac(or equivalent 4242Vdc)/10mA/60S	No flashover or breakdown; The discharge tube shall be removed during the test.
	Input-ground:1500Vac(or equivalent 2121Vdc)/10mA/60S
	Output -ground: 500Vac(or equivalent 707Vdc)/10mA/60S
Insulation resistance	≥2MΩ	@ normal atmospheric pressure, relative humidity: 90%  Testing voltage: 500V  The insulation resistance of AC/DC-ground, AC-DC shall not be less than 2MΩ
Contact current(grounding)	<3.5mA	Input max. nominal operating voltage* 1.1
Contact current(output)	<0.25mA
Ground impedance	<0.1Ω	Apply to AC input power supply with metal grounding enclosure