AC/DC, 48V 0.3A Power Supply

Output Type: Single
Warranty: 2 Years
Output Power: 1 - 50W
Input Voltage: 160-265V
Certification: CE, RoHS, CCC, CB
Brand: Goldpower
Samples:
US$ 20/Piece 1 Piece(Min.Order)
| Request Sample
Customization:
Diamond Member Since 2007

Suppliers with verified business licenses

Manufacturer/Factory

Basic Info.

Model NO.
ZXR10 W201P
Transport Package
Carton
Trademark
Goldpower
Origin
China

Product Description

1 INTRODUCTION
ZXR10 W201P is a low-duty power supply with AC/DC single output. Thanks for the latest circuit design, it is compact and of reliable performance.It has the wide range of input voltage and has many functions including short-circuit protection, over-current protection and lightningproof function.The cooling way is natural conductive. The power supply is designed strictly in accordance with the safety regulations, which conforms to the safety standards and requirements of information technology.
SPECIFICATION REQUIREMENTS
2.1 Environmental Requirements
2.1.1 Operating temperature:-5ºC~+60ºC
2.1.2 Storage temperature:-25ºC~+80ºC
2.1.3 Relative humidity:5%~95%
2.1.4 Absolute altitude:≤3000m
2.1.5 Atmospheric pressure:70~106KPa
2.1.6 Cooling:natural conductive 
2.2 Input Requirements
Item Unit Min Typical Max Testing Conditions
Input voltage range Vac 160 220 265  
Input frequency range Hz 45 50 65  
Power Factor   0.75     Input220Vac,output with full load
Input rush current A     3 Average value
2.3 Output Electrical Requirements
Item Unit Min Typical Max Testing Conditions
Output voltage range V 43.2 48 52.8  
Output current range A 0   0.3  
Load regulation       ±2%  
Voltage regulation       ±2%  
Ripple mV     50 measured within the rated voltage input and load, with 0.1UF filmy capacitor and 10UF/63V high frequency electrolytic capacitor output,bandwidth of oscillograph set at 20MHz.
Output Power W     15 Natural Cooling/Full Output
Output Efficiency % 60     220Vac/Full output
Temperature coefficient /ºC     ±0.02%  
2.4 Protecion
Item Unit Min Typical Max Recovery characteristics
+48V output current-limited  protection A 0.4 0.5 - Auto recovered
short-circuit  protection A - - - Can be short-circuit for a long time,Auto recovered
2.5 SAFTY
Item Level Standards(or testing conditions)
Safety certification To comply with EN60950 EN60950
Insulation voltage
( input to ground)
1500Vac 1500Vac /1Min /Leakage Current10mA
Insulation voltage
( input to output)
3000Vac 3000Vac /1Min / Leakage Current10mA
Insulation resistance 10MΩ Under normal atmospheric pressure, and when the relative humidity is 90%, and the testing voltage is DC 500v, for the power supply, the insulation resistance of input to output, input to ground, and output to ground is no less than 10MΩ.
Isolated transformer isolate the voltage 3000VAC 50Hz/3000Vac/1Min / Leakage Current2mA
Remark: remove the discharge tube at the time of testing.
2.6 EMC
Item Index requirements Standards
CE CLASS B EN55022
RE CLASS B EN55022
voltage sudden fluctuation IEC61000-3-3 IEC61000-3-3
Ripple IEC61000-3-2  B IEC61000-3-2
Surge Line-line4KV     Line-ground6KV IEC61000-4-5
ESD There is no influence on operation of mudole when do ESD on case after installed the case.
Air discharge8KV
EN61000-4-2
2.7 Other requirements
Item Index requirements Performance
MTBF 100000H Pass
Vibration >Frequency : 5 to 9 Hz
>Amplitude
: 3.5mm,9~200Hz
>Direction : 3 directions
>Sweep time :
50minutes(50minute per one way)
> acceleration:10m/s2,
 100% functional after test
Pass
Shock Half-sine wave,acceleration: 20G,Amplitude 11ms,Direction : 3 directions(X,Y,Z)
3 times per one direction
Pass
Dustproof Has some function of dustproof Pass
Odor No peculiar smell and deleterious gas Pass

Send your message to this supplier

*From:
*To:
*Message:

Enter between 20 to 4,000 characters.

This is not what you are looking for? Post a Sourcing Request Now