Custom Power Supply 30kw Mobile Charger Pile EV Charging Station with GB/T

• Customization: Available
• Input Mode: 3-Phase, 5 Wire(3pH+N+E)
• Input Operating Voltage Range: 295~437VAC
• Model NO.: GPEV30-750-S1
• Max. Input Voltage: 560VAC
• Max. Input Current: 60A
• Max. Input Power: 32kVA
• Power Factor: 0.98
• Rated Output Voltage: 750VDC
• Rated Output Current: 40A
• Rated Output Power: 30kw
• Operating Temp. Range: -20~50℃
• Transport Package: Wooden
• Specification: 400 mm× 750 mm× 650mm
• Trademark: Goldpower
• Origin: Shenzhen
• HS Code: 8504401990
• Production Capacity: 1000000 Pieces

Product Description

Features

1. Goldpower 30KW mobile DC charging station designed with single gun, the maximum power is 30KW.
2. Using high-performance ARM chip control, 5-inch true color LCD touch screen, easy to achieve man-machine information exchange
3. With perfect protective function: input over/under voltage protection, output over current protection, output over voltage protection, output short circuit protection, over temperature protection, battery anti-reverse protection, insulation detection protection, emergency stop protection.
4. The charging rectifier module adopts full bridge soft switch technology, the efficiency up to 95% or more.
5. The charging rectifier module adopts active power factor compensation technology, the value up to 0.98.
6. Perfect AC side lightning protection design, to adapt to thunderstorm areas.
7. Ultra-low radiation, safe and reliable. Pressure level, insulation class and EMC of the charger comply to relative requirements as per NB/T 33001-2010,and part of function designed as per "Typical design of EVSE"
8. The design of dustproof and waterproof up to level IP54 to meet indoor and outdoor requirements.To prevent rain directly onto the equipment, the roof needs to be installed outdoor.

System Configuration

GPEV30-750-S1 charger consists of outdoor cabinet, HMI, power distribution unit, monitoring module and charging rectifier module.
 

Optional Configuration	Rectifier module	Optional number	Distribution	Monitoring system	Remark
configuration	GPR75020A	2pcs	AC input: 3-phase 5wire,63A/4P air switch; Anti--thunder:3-phase C pole DC output:  the gun mode output maximum  output current is 40A(DC+,DC-) EV auxiliary power supply: 12V10A/24V5A optional(A+,A-)	Monitoring system	See the module specifications  for more detailed information

Specifications 

Ambient
Parameter	Min.	Typ.	Max.	Unit	Remark
Operating temp. range	-20	25	50	°C	Certificated within this range
Extreme operating  temp. range	-40	25	55	°C	-40°C ~-20°can be loaded with start, extended temperature:50 -55°C, The module outputs linearly at 4% / ° C
Relative humidity	5		95	%	No condensation on the surface
Altitude	0		2000	m

Input
Parameter	Min.	Typ.	Max.	Unit	Remark
Input mode	3-Phase, 5 Wire (3Ph+N+E)				Note: the charger rectifier module without midcourt line
Nominal input voltage range	323	380	437	Vac	Nominal voltage, certified within this voltage range
Input operating voltage range	295	380	437	Vac	The input voltage 315-265Vac is linearly reduced from 15KW to 5KW by 2% / V
Max. input voltage			560	Vac	The module could not work but can't be damaged under this input voltage
Max. input current			60	A	Low voltage full load ,each phase
Max. input power			32	KVA	Input 323Vac,output full load.
Soft start time	5		15	S	The nominal input voltage range rises to the set value of the output voltage.
Power factor	>0.98				Rated input, full load output
	>0.97				Rated input, half load output
Input current harmonic	THD<5%				Rated input, full load output
	THD<10%				Rated input, half load output
Grounding method	Protective ground to the power supply case

Output
Parameter	Min.	Typ.	Max.	Unit	Remark
Rated output voltage	750			Vdc
Rated output voltage range	300		750	Vdc	Certificated within this output voltage range
Rated output current	2		40	A
Rated output power			30	KW
Stabilized voltage precision	-0.5		+0.5	%
Ripple effective value			1	%
Dynamic response time			200	us
Dynamic response  overshoot	-0.5		+0.5	%
Efficiency			95.8	%
Noise			65	dB(A)
Current-sharing	-5		5	%	Tested when the output current more than 50%
Cooling	Forced air cooling

Others requirements
Parameter	Min.	Typ.	Max.	Unit	Remark
Output current error	-1		1	%
Output voltage error	-0.5		0.5	%
DC meter error		0.5		Level
Low voltage auxiliary power supply		24±1%		Vdc	Optional output 5A
		12±1%		Vdc	Optional output 10A
Input cable length	7			m	Optional length
Charging cable length	5			m	Optional length(don't contain the length of gun)
Charging gun interface	Comply to the latest national requirements of GB/T20234.3-2015

Mechanical
Dimension	(W×H×D)400 mm×750 mm×650mm
Weight	≤60Kg(including module)

VR Factory tour:

Any inquiry,please feel free to contact us: