Gpad202m125-2A-1L

• Customization: Available
• Output Type: Single
• Warranty: 2 Years
• Output Power: 2000W
• Input Voltage: 180-265
• Certification: CE, RoHS
• Brand: Gold Power

Product Description

 

The GPAD202M125-2A-1L is dual outputs (including 24V auxiliary output) AC/DC high-power
density regulated power supply with single-phase AC input. It features the latest circuit design,   compact structure, and reliable performance. featuring a wide input voltage range, high voltage regulation accuracy, and high output efficiency.

The power supply is designed in strict accordance with safety regulations, with flame retardant  and moisture-proof features, meeting information technology equipment safety standards. The module dimensions (L * W * H) are 380 * 145 * 48mm.
 

Product Overview
Model	Input voltage	Output voltage	Output current	Rated power	Dimensions (L*W*H)
GPAD202M60-2A	180~265 Vac	60 Vdc	33.5 A	2000 W	380*145*48mm
GPAD202M125-2A	180~265 Vac	125 Vdc	16 A	2000 W	380*145*48mm
GPAD352M60-2A	180~265 Vac	60 Vdc	58.5 A	3500 W	380*145*48mm
GPAD352M125-2A	180~265 Vac	125 Vdc	28 A	3500 W	380*145*48mm

Input Characteristics
Parameters	Min	Typical	Max	Unit	Annotation
Input voltage range	180	220	265	Vac	Single-phase three-wire: L+N+PE
Grounding Method	The power supply protection ground is connected separately to the enclosure
Input frequency	47	50/60	63	Hz	At rated load
Power factor (PF)	0.99			/	At rated input and rated power output
Input current			25	A
Inrush current			40	A
DC Startup time			3	S	From 220Vac input, ON/OFF signal to stable DC output
Overall Startup Time			8	S	From ON/OFF signal, 220Vac input to stable DC output
Input Protection Features
Over-voltage protection	280		320	Vac	Half-load test, Auto-recovery
Over-voltage recovery	270		300	Vac
Under-voltage protection	150		175	Vac	Half-load test, Auto-recovery
Under-voltage recovery	160		180	Vac

Output Characteristics
Parameters	Min	Typical	Max	Unit	Annotation
Output voltage range	122	125	127	Vdc	Adjustable via potentiometer Default voltage: 125V Adjustment accuracy: ≤±0.2V.
No-load output voltage		125		Vdc
Rated output current	0		16	A	2000W output power
Voltage regulation accuracy			±1	%	Full voltage range, full load range variation
Source regulation			±1	%	Rated current output, full voltage range variable
Load regulation			±1	%	Rated voltage input, full load range variation
Temperature coefficient	±0.02			%/°C	Rated voltage, current output; full operating temperature
Dynamic response recovery time			500	uS	25%~50%~25% load change,   Hop rate: 1A/us, Hop cycle: 4ms
Dynamic response overshoot	±5			%
Noise and ripple (peak-to-peak)			400	mV	*Note 1
Switching on/off overshoot	±5			%
Output efficiency	93			%	Rated input, rated load
Output Voltage Rise Time			240	mS	Rated input, full load, the output voltage rises from 10% to 90%
Main Circuit Shutdown Delay			800	mS	After receives the shutdown signal from the control interface SW, it should stop operating within 800 ms
Main Circuit Dynamic Characteristics	The instantaneous drop or overshoot of the output voltage should not exceed ±5%, and it should not cause abnormal operation  or protection of the power supply			Load Change	Loading: The output changes from 0 to full load within 10 μs. Unloading: The output changes from full load to 0 within 10 μs. Full voltage range input, Modulation frequency from 5Hz to 5KHz; Duty cycle from 20% to 100%; Output power settings at 50%, 80%, and 100%; These conditions are combined in various ways to test the output under each setting.
	The output pulse waveform should have no significant   distortion or damping, and  there should be no abnormal operation or protection triggered in the power supply			Pulse Modulation

ON/OFF control	Low Level: Power supply starts (connected to GND) High Level or Floating: Power supply shuts down
Capacitive Load	≤1000	uF