| Customization: | Available |
|---|---|
| Output Type: | Single |
| Warranty: | >2 Years |
|
Still deciding? Get samples of $ !
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| Product series | |||||||
| Product model | Input range (VDC) |
Output power (W) |
Output voltage (VDC) |
Output (A) |
Ripple & noise (mV) |
full load efficiency (%) Min/Typ. |
Remarks |
| GPS75-48S12 | 36-75 | 75 | 12 | 6.25 | 120 | 87/89 | Standard positive logic |
| GPS75-48S12N | Standard negative logic | ||||||
| GPS75-48S12H | Heat dissipation aluminum plate logic | ||||||
| GPS75-48S12NH | Negative logic of heat dissipation aluminum plate | ||||||
| input characteristics | |||||
| project | going | Min. | Typ. | Max. | unit |
| Maximum input current | 36V input voltage, full load output | -- | -- | 3 | A |
| No-load input current | Rated input voltage | -- | -- | 15 | mA |
| Input voltage (max. 1sec.) | Entering outside this range may cause permanent damage | -0.7 | -- | 85 | VDC |
| starting voltage | -- | -- | 36 | ||
| Input under-voltage protection | No-load test, full load test will pre-emptive overcurrent protection | -- | -- | 34 | |
| Remote Control Foot (CNT) | Positive logic: CNT is suspended or connected to 3.5-15V to start up, and connected to 0-1.2V voltage to shut down | reference voltage -VIN | |||
| Negative logic: CNT is suspended or connected to 3.5-15V for shutdown, and connected to 0-1.2V voltage for startup | |||||
| output characteristic | |||||
| project | going | Min. | Typ. | Max. | unit |
| Output voltage accuracy | Nominal input voltage, from 0% to 100% load | -- | ±0.2 | ±1.0 | % |
| Linear regulation rate | Full load, input voltage from low voltage to high voltage | -- | ±0.1 | ±0.5 | |
| Load regulation rate | Nominal input voltage, from 10% to 100% load | -- | ±0.1 | ±0.5 | |
| Transient recovery time | 25% load step change (step rate 1A/50uS) | -- | 200 | 250 | uS |
| Transient response deviation | -5 | -- | 5 | % | |
| Temperature drift coefficient | loaded to capacity | -0.02 | -- | +0.02 | %/ºC |
| Ripple & noise | 20M bandwidth, external 470uF above capacitor test | -- | 100 | 120 | mVp-p |
| Output voltage adjustable (TRIM) | -20 | -- | +10 | % | |
| Output voltage remote compensation (Sense) | -- | -- | 5 | % | |
| Overtemperature protection | Maximum surface temperature of the product metal substrate | 105 | 115 | 125 | ºC |
| Overcurrent protection output | Enter full voltage | 6.5 | -- | 8 | A |
| Output short circuit protection | Hiccups, sustainable, self-recovery | ||||
){kind=link}