DC-DC 1/4 Brick Isolation Converter 9-36V 12V 120W

Product Details
Customization: Available
Output Type: Single
Warranty: >2 Years
Still deciding? Get samples of $ !
Request Sample

360° Virtual Tour

Diamond Member Since 2007

Suppliers with verified business licenses

Audited Supplier Audited Supplier

Audited by an independent third-party inspection agency

Management System Certification
ISO14001:2015, ISO45001:2016, IATF16949
  • DC-DC 1/4 Brick Isolation Converter 9-36V 12V 120W
  • DC-DC 1/4 Brick Isolation Converter 9-36V 12V 120W
  • DC-DC 1/4 Brick Isolation Converter 9-36V 12V 120W

Basic Info.

Output Power
101 - 200W
Input Voltage
Input:9~40
Modulation System
PWM

Product Description

Product series
 Product model  Input range
(VDC)
 Output power
(W)
 Output voltage
(VDC)
 Output
(A)
Ripple & noise
(mV)
 full load efficiency (%)
Min/Typ.
 Remarks
GPQ120-24S12A 9-36 120 12 10 120 87/89 Standard positive logic
GPQ120-24S12AN Standard negative logic
GPQ120-24S12AH Heater is on logic
GPQ120-24S12ANH Negative logic for radiators
Note: When the input is below 18Vdc, the output power is linearly reduced. When the input is 9Vdc, the output power is 100W.
 
Input characteristics
 Item  Technical indicators Min. Typ. Max.  unit
Maximum input current 9V input voltage, full load output -- -- 18 A
No-load input current Rated input voltage -- -- 20 mA
Input voltage (max. 1 sec.) Entering outside this range may cause permanent damage -0.7 -- 50 VDC
 Starting voltage   -- -- 9
Input under-voltage protection No-load test, full load test will pre-emptive overcurrent protection -- -- 8.5
Remote Control Foot (CNT) Positive logic: CNT is suspended or connected to 3.5-15V to start up, and connected to 0-1.2V voltage to shut down  reference voltage -VIN
Negative logic: CNT is suspended or connected to 3.5-15V for shutdown, and connected to 0-1.2V voltage for startup

 Output characteristic
 Item  Technical indicators Min. Typ. Max.  unit
Output voltage accuracy Nominal input voltage, from 10% load -- ±0.5 ±1.0 %
Linear regulation rate Full load, input voltage from low voltage to high voltage -- ±0.1 ±0.2
Load regulation rate Nominal input voltage, from 10% to 100% load -- ±0.2 ±0.5
Transient recovery time 25% load step change (step rate 1A/50uS) -- 200 250 uS
Transient response deviation -5 -- 5 %
Temperature drift coefficient  loaded to capacity -0.02 -- +0.02 %/ºC
Ripple & noise 20M bandwidth, external 220uF above capacitor test -- 100 120 mVp-p
Output voltage adjustable (TRIM)   -20 -- +10 %
Output voltage remote compensation (Sense)   -- -- 5 %
Overtemperature protection Maximum surface temperature of the product metal substrate 105 115 125 ºC
Overvoltage protection output   125 -- 140 %
Overcurrent protection output 11 -- 22 A
Output short circuit protection Hiccups, sustainable, self-recovery

Send your message to this supplier

*From:
*To:
*Message:

Enter between 20 to 4,000 characters.

This is not what you are looking for? Post a Sourcing Request Now
Contact Supplier