1000va, 2000va, 3000va Industrial Inverter

• Transport Package: Carton
• Trademark: Goldpower
• Origin: China

Product Description

 

GPDA1000VA-A
Input:40-60Vdc;  Output :220Vac; Capacity:1000VA








 

 

ISO9001-2000 Certified Professional Power Supply Manufacturer

Shenzhen Goldpower Tech Co., LTD Address: 1301 Bldg A, New-tech Plaza Tian'an Cyber Park, Futian District,     Shenzhen City. Tel: [phone]  83433146   Fax: [phone] 83437956 Website: http://szgoldpower.en.made-in-china.com   Postal code: 518040

Preface



 Welcome to use GPDA1000VA-A,GPDA1000VA-A from Gold Power, consisting of two outputs, bypass AC input, with RS485 com port. Due to the latest circuit design, it is compact and of reliable performance, and the system is equipped with protections against input reversed polarity, over temperature, output short-circuit, over-current and over-voltage. The power supply is designed strictly in accordance with the safety regulations, which conforms to the safety standards and requirements of information technology.
Statement

1. The performance of GPELU4806-10 embedded power system is detailed in the specification. Please learn the specification before any operation is conducted in compliance with safety rules. Our warrant will not apply to any damage of product caused by improper operation or utilization out of range specified in this specification.
2. The information in this specification is subject to change without any notice.

Safety rules
 

High voltage!	AC input line is high voltage operating line. Be sure that the AC input is cut off before implementing any operations. Warning signs shall be tagged to the switches that should not be touched during operating process.
Caution!	AC terminals and other unnecessarily bare part shall be strictly insulated.
Caution!	The device shall be securely grounded before power-on.
Caution!	The module is hot-swappable; please make sure that all indicators on module panel is under state of off before the module is inserted.
	Any operation at AC & high voltage under lightning is forbidden.

1. Parameters


 

Input
Parameter		Min.	Typ	Max.	Unit	Remarks
DC input	Working voltage range	40		60	Vdc
	Rated voltage		48		Vdc
	Rated current			30	A	Rated input, Rated output.
	Max surge current			45	A	≤ rated 150%
AC output	Working voltage range	200		240	Vac
	Rated voltage		220		Vac
	Rated current			5	A

 

Output
Parameter		Min.	Typ		Max.	Unit	Remarks
Inverter Output	Rated voltage		220			Vac	Full input range
	Rated current		4.6			A
	Voltage accuracy				±5	%	Full input range
	Rated Frequency	49	50		51	Hz
	Rated capacity				1000	VA
	Rated power				1000	W
	Efficiency	85				%	Rated working condition
	Power factor	0.8					Rated working condition
	Dynamic transient recovery time				60	ms
	Waveform	Sine wave THD<3%(linear load)
		Sine waveTHD<8%(non-linear load)
	Overload capacity	105~125% load for more than10 mins, 125~150%load for more than10 secs.
	Output current peak ratio	3:1
	Output QTY	Two AC outputs
Bypass AC output	Output voltage range	200			240	Vac	Changes according to AC voltage's changing.
	Rated voltage			220		Vac
	Rated current				5	A
	Inverter switches to grid's time.				20	ms	Rated load
	Grid switches to inverter's time.				100	ms	Rated load
	Output description	Share the same output terminals to the inverter. When there is AC input, use the grid. When AC fail, automatically switch to the inverter and then power the equipments.

1. Parameters
 

Protections
Parameter		Min.	Typical	Max.	Unit	Remarks
Inverter	DC input UVP set point	36			Vdc
	DC input UVP recovery point			40	Vdc	Recover in 1 min
	DC input UVP tolerance	2			Vdc
	DC input OVP set point			66	Vdc
	DC input OVP recovery point	60			Vdc	Recover in 1 min
	DC input OVP tolerance	2			Vdc
	OCP	OCP without auto-recovery function.
	OTP	Cut off power when the heat sinking is over temperature.
	Anti-reverse connection	Inverter will not work when reverse connecting the input.
	Short protection	When inverter shorts, it'll auto restart every 1 min, if the inverter become normal, it can auto-recover. If it short for long time, the inverter will stop working.
	Output OCP	When inverter is over current, it'll auto restart every 1 min, if the inverter become normal, it can auto-recover. If it is over current for long time, the inverter will stop working.
	Alarm	When there is input abnormal, overload, short, inverter malfunction, can hear the buzzer.
Bypass input	Input OCP	Can't auto-recover.

 

Ambient requirements
Parameters	Min	Typ.	Max	Unit	Remark
Operating temp	-20		+55	°C
Storage temp	-25		+70	°C
Humidity	0		95	%	Relative humidity, no condensing
Altitude			1500	m	Complied with GB3859.2-93
Cooling	Natural cooling

 

Insulation rating
Parameter	Requirement	Remark
Insulating strength	Input - output:1500Vac/10mA//1min	No flashover or breakdown
	Input -earth:1500Vac/10mA//1min
	Output-earth:500Vac/10mA//1min
Insulation resistance	@ normal atmospheric pressure, relative humidity: 90%  Testing voltage: 500v dc  The insulation resistance of input-output, input-ground, output-ground shall not be less than 10MΩ

 

EMC
Conducted emission	Complied with YD/T983-1998 class A
Radiated emission	Complied with YD/T983-1998 class A
Immunity	Complied with YD/T983-1998  class A
Reverse irrigation broadband noise current relative value	<10%
Noise	<50dB(1m)
Dedust	Functional
Smell	No harmful gas

1. Parameters

 

Mechanical specifications
L*W*H (mm)	Refer to following chart
Weight(kg)	≤4kg

\* MERGEFORMAT
























































2. Signals


2.1,LED definition
 

Alarms
No.	Status	LED indicator	Remark
1	Green flicker	Normal	Report input voltage, current, temperature through 485 port, together with  input OVP,UVP, OCP, OTP, fan fail,, etc.
	Red off
	Purple off
2	Green on	Input UVP, OVP, short, overload, OTP, protection. Fan fail
	Red flicker
	Purple off
3	Green off	Malfunction
	Red flicker
	Purple off
4	Green off	Input reverse connection, inverter malfunction.
	Red off
	Purple off
5	Green on	AC grid normal.
	Red off
	Purple on

2.2 Terminals' definition

\* MERGEFORMAT































3. Installation

\* MERGEFORMAT 3.1 Embedded



















Dimension

Installation method:
Insert the inverter into the specific position, in order to guarantee it's positioned properly, the hungers should be screwed with 4 of M6 screws.

\* MERGEFORMAT 3.2 wall-mounted type











Dimension
Installation method:
As shown on above drawing, you need to fill in the wall with 4 of M6 setscrews, and then fix the inverter on to the wall.