Customization: | Available |
---|---|
Output Type: | Single |
Driving Method: | LED Regulator Voltage |
Suppliers with verified business licenses
Audited by an independent third-party inspection agency
1.2input |
|||||
Parameter | Min | Typ. | Max | Unit | Remark |
AC input voltage range | 90 | 220 | 264 | Vac | |
AC input voltage frequency | 3 | A | |||
power factor | 25 | A | 220VAC input, output full load | ||
Input impulse current | 47 | 50 | 63 | Hz | Full range normal operation |
AC input system | 0.95 | 220VAC input, output full load |
1.3output |
||||||
Parameter | Min | Typ. | Max | Unit | Remark | |
output voltage Output current range |
+3.8V | +3.8V | Vdc | Two outputs are grounded together | ||
+2.8V | +2.8V | |||||
Load adjustment rate Voltage stabilization accuracy |
+3.8V | +3.8V | Vdc | |||
+2.8V | +2.8V | |||||
Source adjustment rate | +3.8V | 0 | 30 | A | The total output current of the two circuits is 60A, + 2.8V can carry 30A at most, and + 3.8V can carry 60A at most when + 2.8V is not loaded | |
+2.8V | 0 | 30 | ||||
output voltage Output current range |
+3.8V | 200 | m Vp-p | At rated input / output, add 0.1 ū F ceramic chip capacitor and 10 ū F one high-frequency electrolytic capacitor each, with a bandwidth of 20MHz for measurement. At low temperature below - 25, the 3.8V ripple is 300 m Vp-p and the 2.8V ripple is 150 m VP-P | ||
+2.8V | 100 | |||||
Load adjustment rate | ±5 | % | ||||
Voltage stabilization accuracy | ±2 | % |