Bdpad501m54-1c 508W, 53.5 10A Power Supply

• Customization: Available
• Output Type: Single
• Warranty: 2 Years
• Model NO.: BDPAD501M54-1C
• Output Power: 508W
• Input Voltage: 150-290VAC
• Certification: CE, RoHS, CCC, CB, FCC
• Brand: Goldpower
• Transport Package: Carton
• Specification: 359*180*66.9mm
• Trademark: Goldpower
• Origin: China
• HS Code: 8504401400

Product Description

Welcome to use the Customized Power BDPAD501M54-1C from SHANGHAI BEIDIAN. The power can work normally under wide range of input 90V-290VAC, with d -53.5V single output. It is also endowed with short-circuit protection, over-current protection, output over-voltage, output under-voltage and other functions. The power is according with the safety requirements and the information technology equipment safety standards.

 

Environment
Parameter	Min	Model	Max	Unit	Note
Work temperature	-40	25	55	°C
Storage environment temperature	-40	25	65	°C
Relative humidity (RH)	5		95	%
Altitude	0		4000	m	Long-term operation available. Max. temperature should be 65ºC, which falls  1.5°C with every1000m increasing
Atmospheric pressure;	70		106	KPa
Cooling					Natural cooling

 

Input
Parameter	Min	Model	Max	Unit	Note
Input voltage range	90	110/220	290	Vac	Affordable max. input voltage (static): long-term affording valid voltage of 320V sinusoidal wave voltage without damage.
DC input voltage	240		380	Vdc
Input frequency	47	50/60	63	Hz
Max input current			7	A	Input 150Vac, max load 500W
DC input Max current			3	A
Power factor	0.98				Rated input, rated load
AC input formats	Single-phase triplet type				110Vac/220Vac single-phase,110Vac double fire wire input

 

Basic Output Features
Parameter	Min	Model	Max	Unit	Note
Output voltage range		-53.5		Vdc
Output current range		10		A
Load regulation			±1	%
Regulation			±2	%
Line regulation			±1	%
Ripple(peak-to-peak value)			200	mV	Rated input/output, testing with each of 0.1uF film capacitor and 10uF high frequency electrolytic capacitor, under band width of 20MHz.
Output power		540		W	150-290Vac full voltage range
Output efficiency	88			%	Input 220VAC, rated output voltage, above 80% rated load  output
	80			%	Input 110VAC, rated output voltage, above 50% rated load output
Boot start time			8	S	Rated input voltage startup--output voltage found--Setting value
Switch overshoot amplitude			±5	%	Full voltage range, full load to min load, No capacitive loads.
Dynamic response overshoot			±5	%	Load 25%-50% or 50%-75%-50% load fluctuation
Dynamic response recovery time			200	us
Temperature coefficient			±0.02	%/ºC
Output lasting time	10			ms	220Vac input, full load output

 

Protection
Parameter	Min	Model	Max	Unit	Note
Input under-voltage point			80	V	Auto recoverable
Input under-voltage recovery point			90	V	Hysteresis not less than 5V
Input over-voltage protection point	300			V	Auto recoverable
Input over-voltage recovery point	290			V	Hysteresis not less than 5V
Output over-voltage protection point	58		60	V	Lock up
Output current-limiting protection	10.9		13	A	Auto recoverable
Short circuit protection				A	Long-term short circuit without damage,. Auto recoverable
Over temperature Protection			100	ºC	Auto recoverable under environment temperature 60ºC. Power is with thermal protection.

Safety and Insulation Rating
Parameter	Standard Requirements	Note
Safety requirement	The design meets with the requirements of latest version UL60950-1,EN60950-1,IEC60950-1,UL50&EN60950-22. Final goods are given TUV, UL, CE approval.
Input-output	3000Vac(4242Vdc)/10mA//1min	No breakdown and flashover, test remove discharge tube
Input-ground	1500Vac(2121Vdc)/10mA//1min
Output-ground	500Vdc(700Vdc)/10mA//1min
Leak current to earth	<3.5mA	264Vac input  50HZ input
Insulation resistance	≥10MΩ	In normal atmospheric pressure, relative humidity: 90%  Testing voltage: 500v dc  insulation resistance of input-output, input-ground, output-ground shall not be less than 10MΩ
Safety certification	According to requirements of IEC60950,UL60950, GB4943-2001 standards. Final goods get UL,TUV,CE and 3C approval	UL60950-1;EN60950-1 IEC60950-1;GB4943-2001

 

EMC and Others
Parameter	Standard
CE	EN55022 - Class B  (3dB allowance required)
RE	EN55022 - Class B (3dB allowance required)
ESD	EN/IEC 61000-4-2   EN55024 contract discharge: ±6KV,  air discharge: ±8KV,directive B (Discharge from rack inside to outside) North Africa: contract discharge: ±8KV,air discharge: ±15KV
Harmonic wave emission	EN/IEC61000-3-2  CLASS A
CS	EN/IEC 61000-4-6 LEVEL 3;10V/m,80%AM  Directive A
RS	EN/IEC 61000-4-3 LEVEL 3;10V/m,80%AM  Directive A
EFT/B	EN/IEC 61000-4-4 ±2 KV Directive B; North Africa; GND terminal ±4 KV
SURGE	EN/IEC 61000-4-5 Differential mode: ±6KV, common mode: ±6KV
DIP	EN/IEC61000-4-11  dips to 70%Ut, lasting time: 100mS; dips to 40%Ut, lasting time 20ms; dips to 0%Ut, lasting time is 0ms; falling from 0°,45°,90°,135°,180°,225°,270°,315°phases, meeting with directive B; other conditions meet with directive B
Voltage fluctuation and flickering	EN/IEC61000-3-3  Pst≤1.0 ; P1t≤0.65;dc≤3.3%;dmax≤4%;d(t) value exceeding 3% time≤500ms
Lightning proof	AC input port meets with 8/20us inrush current, differential mode 6KA, common mode 6KA
Reliability (counting)	≤150,000 Hours
Shelf life	≥10 years, sealed electrical capacitor can be kept for 10 years in 40ºC
Yearly returning rate	≤1%
Shake	Normal environmental test: 5- 9Hz; amplitude: 3.5mm;9-200Hz;acceleration spectral density : 10m2/s3;sweep frequency for 5 times in each direction  of 3 axis directions(3*50 minutes) Packing transportation test: 5-20Hz,1.0m2/s3;20-200Hz:-3dB;total RMS accelerated speed: 0.781Grms, testing time: 30min for each direction.
Shock	Normal environmental test: test: half-sinusoidal wave,accelerated speed : 20G,impulse width :11ms; 3 times for each of X,Y,Z directions Packing transportation test: half-sinusoidal wave,accelerated speed : 300m/s2,impulse width : 6ms; 3 times for each of 6 directions.
Crush	Normal environmental test: half-sinusoidal wave,accelerated speed : 20G,impulse width : 11ms;3 times for each of X,Y,Z directions Packing transportation test: half-sinusoidal wave,accelerated speed : 180m/s2,impulse width : 6ms;100 times each for 6 directions.
Falling	Normal environmental test: Weight <10Kg,10-25Kg,25-50kg,≥50kg; falling height: 0.10m,0.075m,0.05m,0.025m;  face S1,edge E1, E3,angle C degree,C2 falling for one time respectively Packing transportation test: face, angle, and edge falling, weight 50-100Kg,40-50Kg, falling height:  30cm,40cm.
Acoustic noise	Less than 55dBA; testing distance: 1m,natural cooling
Cooling	Under 65ºC, no wind, 60W natural cooling;(each 30W of 2 output); Wind available, wind speed 0.5m/s, two air flues(one on the left side, the other on the right side), full load operation within temperature range. Natural cooling through paster rack cooling, cooling fin, or conductive fin
Smelling	No abnormal or unhealthy smelling
Dust proof, water proof	IP55 dust proof, water proof