Ae200 200wbrick Switching Power Supply

• Customization: Available
• Output Type: Single
• Warranty: >2 Years
• Output Power: 101 - 200W
• Input Voltage: Input:9~40
• Modulation System: PWM

Product Description

Main specifications of the products:
Input voltage range (Vdc)	Output Voltage (Vdc)	Output current (A)	Output voltage adjustable range (%)	Output Ripple and Noise (mVp-p)	Typical efficiency at full load (%)
9~40	12.0	0~16.66	-20~+10	100	93.5

Output characteristics
Output voltage accuracy		11.70	12.00	12.30	Vdc
Range of output voltage calibration value		11.82	12.00	12.18	Vdc
Output voltage adjustable range		-20		+10	%Vo
Voltage Adjustment Rate				±0.2	%Vo	Output at full load
Load Adjustment Rate				±0.5	%Vo	Vin=24Vdc
Efficiency	50% load	93.0	94.0		%	Vin=24Vdc,Tcase=25ºC,heat sink attached to housing;
	100% load	92.5	93.5		%
Output current		0		16.66	A
Output overcurrent protection		17.5	20.5	23.5	A	Vin=16~40Vdc,Hiccups, auto-recoverable;
Output Overvoltage Protection		14.5	16.5	18.5	Vdc	Hiccups, auto-recoverable;
Output Ripple and Noise			100		mVp-p	Test method with reference to figure(11)
Output external capacitor		660	1000		µF	polymer tantalum or solid-state capacitors, or low-ESR electrolytic capacitors (-55°C), with withstanding voltage ≥ 25V;
Output capacitive load		3300			µF	pure resistive load test, tantalum capacitor or low ESR electrolytic capacitor, voltage withstand ≥ 25V;
Input power-on delay time			200	250	ms	The time from input power-on to output voltage rise to 10%;
ON/OFF power-on delay time			5	10	ms	The time from ON/OFF power-on to output voltage rise to 10%;
Output voltage rise time			10	30	ms	The time for the output voltage to rise from 10% to 90%;
Switching output voltage overshoot amplitude				±3	%Vo
Remote switch-on overshoot amplitude				±3	%Vo
Transient Response	Overshoot amplitude		300	350	mV	di/dt=1A/µs,25%-50%-25%,load step change;
	Recovery time		500	800	µs
	Overshoot amplitude		300	350	mV	di/dt=1A/µs,50%-75%-50%,load step change;