120kw DC Charger for Electric Car Charging Station with GB/T

• Certification: ISO
• Usage: Charging Station
• Color: Green
• Input Voltage: 295~437VAC
• Efficiency: 96.4%
• DC Charging Gun: 200A DC *2
• Model NO.: GPEV120-AA750-S2
• IP Protection Level: IP55
• Weight: 250kg
• Transport Package: Carton/Wooden
• Specification: 750*700*1800 mm
• Trademark: Goldpower
• Origin: Shenzhen
• HS Code: 8504401990
• Production Capacity: 1000000 Pieces

Product Description

Features:

1. Goldpower integrated DC charger designed with dual gun, the maximum power is 120KW
2. Using high-performance ARM chip control, 7-inch true color LCD touch screen, easy to achieve man-machine information exchange
3. With perfect protection function like: input over/under voltage protection, output over current protection, output over voltage protection, output short circuit protection, over temperature protection, battery anti-reverse protection, insulation detection protection, emergency stop protection.
4. The charging rectifier module adopts full bridge soft switch technology, the efficiency up to 95% or more.
5. Perfect AC side lightning protection design, to adapt to thunderstorm areas.
6. Ultra-low radiation, safe and reliable. Pressure level, insulation class and EMC of the charger comply to relative requirements as per NB/T 33001-2010,and part of function designed as per "Typical design of EVSE"
7. The design of dustproof and waterproof up to level IP54 to meet indoor and outdoor requirements.To prevent rain directly onto the equipment, the roof needs to be installed outdoor.
    

 GPEV120-AA750-S2 System Configuration

 GPEV120-AA750-S2 charger consists of outdoor cabinet, HMI, power distribution unit, monitoring module and  charging rectifier module. Specific matching module refers to following table:

Optional Configuration	Rectifier module	Optional number	Distribution	Monitoring system	Remark
configuration	GPR75020A (15KW module)	8pcs	AC input: 3-phase 5wire,250A/3P MCCB; Anti--thunder:3-phase C pole DC output: double gun output mode.  Single gun mode output maximum  output current is 200A(DC+,DC-) while double gun each 100A  EV auxiliary power supply: 12V10A optional(A+,A-)	Monitoring system	See the module specifications  for more detailed information

Specifications :

Ambient
Parameter	Min.	Typ.	Max.	Unit	Remark
Operating temp. range	-20	25	50	°C	Certificated within this range
Extreme operating  temp. range	-40	25	55	°C	-40°C ~-20°can be loaded with start ,extended temperature:50 -55°C, The module outputs linearly at 4% / ° C
Relative humidity	5		95	%	No condensation on the surface
Altitude	0		2000	m

 

Input
Parameter	Min.	Typ.	Max.	Unit	Remark
Input mode	3-Phase, 5 Wire (3Ph+N+E)				Note: the charger rectifier module without center line
Nominal input voltage range	323	380	437	Vac	Nominal voltage, certified within this voltage range
Input operating voltage range	295	380	437	Vac	The input voltage 315-265Vac is linearly reduced from 15KW to 5KW by 2% / V
Max. input voltage			560	Vac	The module could not work but can't be damaged under this input voltage
Max. input current			240	A	Low voltage full load ,each phase
Max. input power			166	KW	Input 323Vac,output full load.
Soft start time	5		15	S	The nominal input voltage range is energized to the power supply and the output voltage rises to the set value.
Power factor	>0.98				Rated input, full load output
	>0.97				Rated input, half load output
Input current harmonic	THD<5%				Rated input, full load output
	THD<10%				Rated input, half load output
Grounding method	Protected ground to the power supply case

 

Output
Parameter	Min.	Typ.	Max.	Unit	Remark
Rated output voltage	750			Vdc
Rated output voltage range	300		750	Vdc	Certificated within this output voltage range
Rated output current	10		160	A	Single gun charging mode
	5		80	A	Double gun charging mode
Rated output power			120	KW	Max. power up to 150KW
Stabilized voltage precision	-0.5		+0.5	%
Ripple effective value			1	%
Dynamic response time			200	us
Dynamic response overshoot	-0.5		+0.5	%
Efficiency			96.4	%
Noise			65	dB(A)
Current-sharing	-5		5	%	Tested when the output current more than 50%
Cooling	Forced air cooling

 

Mechanical
Dimension	(W×H×D) 750*700*1800 mm
Weight	≤250Kg(including module)

Communication protocol	GB/T 18487.1-2015
DC Charging Gun	200A DC *2
Function	1.      LAN/WLAN/4G communication 2.     IC card/Apps/QR code payment 3.     Cloud management