60kw DC Charger for Electric Car Charging Station with Double Gun

• Customization: Available
• Certification: ISO
• Usage: Charging Station
• Model NO.: GPEV60-AA750-S2
• Input Voltage: 295~437VAC
• Efficiency: 96.4%
• DC Charging Gun: 125A DC *2
• IP Protection Level: IP55
• Weight: 90kg
• Transport Package: Carton/Wooden
• Specification: 500*620*900 mm
• Trademark: Goldpower
• Origin: Shenzhen
• HS Code: 8504401990
• Production Capacity: 1000000 Pieces

Product Description

Features:

1. Designed with double guns, the maximum output power charging with single gun is 60KW, and each output power is 30KW while charging with two guns.
2. Using high-performance ARM chip control, 4.3-inch true color LCD touch screen, easy to achieve human-machine information exchange.
3. With perfect protective function: input over/under-voltage protection, output over current protection, output over voltage protection, output short circuit protection, over temperature protection, battery anti-reverse protection, insulation detection protection, emergency stop protection.
4. The charging rectifier module adopts bridgeless PFC technology and LLC resonant soft-switching technology, the efficiency can be up to 96% or more.
5. Perfect AC side lightning protection design, to adapt to thunderstorm areas.
6. The charging rectifier module adopts active power factor compensation technology, the power factor can be up to 0.99.
7. Safe and reliable. Charging pressure level, insulation class and EMC of the charger comply to relative requirements as per NB/T 33001-2010 "Electric vehicle non-on-board conductive charger technology condition", and designed according to part of function as per "Typical design of EVSE"
8. The design level of dustproof and waterproof up to level IP54 to meet the outdoor installation using requirements.

 GPEV60-AA750-S2 System Configuration

 GPEV60-AA750-S2 charger consists of outdoor cabinet, HMI, power distribution unit, monitoring module and  charging rectifier module. Specific matching module refers to following table:

Optional Configuration	Rectifier module	Optional number	Distribution	Monitoring system	Remark
configuration	GPR75020A (15KW module)	4pcs	AC input: 3-phase 5wires,125A/4P breaker; Anti-lightning:3-phase C pole; DC output: Dual guns output, the maximum output current with single gun is 80A(DC+,DC-),each gun the max. current is 40A. EV auxiliary power supply: 12V 10A/24V 5A(A+,A-)	NE70032	See the module specifications  for more detailed information

Specifications :

Ambient
Parameter	Min.	Typ.	Max.	Unit	Remark
Operating temp. range	-20	25	50	°C	Certificated within this range
Extreme operating  temp. range	-40	25	55	°C	-40°C ~-20°can be loaded with start ,extended temperature:50 -55°C, The module outputs linearly at 4% / ° C
Relative humidity	5		95	%	No condensation on the surface
Altitude	0		2000	m

 

Input
Parameter	Min.	Typ.	Max.	Unit	Remark
Input mode	3-Phase, 5 Wire (3Ph+N+E)				Note: the charger rectifier module without center line
Nominal input voltage range	323	380	437	Vac	Nominal voltage, certified within this voltage range
Input operating voltage range	295	380	437	Vac	The input voltage 315-265Vac is linearly reduced from 15KW to 5KW by 2% / V
Max. input voltage			450	Vac	The module could not work but can't be damaged under this input voltage
Max. input current			120	A	Low voltage full load ,each phase
Max. input power			66	KW	Input 323Vac,output full load.
Soft start time	3		8	S	The nominal input voltage range is energized to the power supply and the output voltage rises to the set value.
Power factor	>0.98				Rated input, full load output
	>0.97				Rated input, half load output
Input current harmonic	THD<5%				Rated input, full load output
	THD<10%				Rated input, half load output
Grounding method	Protected ground to the power supply case

 

Output
Parameter	Min.	Typ.	Max.	Unit	Remark
Rated output voltage	750			Vdc
Rated output voltage range	300		750	Vdc	Certificated within this output voltage range
Rated output current	4		80	A	Single gun charging mode
	2		40	A	Double gun charging mode
Rated output power			60	KW	Max. power up to 150KW
Stabilized voltage precision	-0.5		+0.5	%
Ripple effective value			1	%
Dynamic response time			200	us
Dynamic response overshoot	-0.5		+0.5	%
Efficiency			96.4	%
Noise			65	dB(A)
Current-sharing	-5		5	%	Tested when the output current more than 50%
Cooling	Forced air cooling

 

Mechanical
Dimension	(W×H×D) 500*620*900 mm
Weight	≤90Kg(including module)

Communication protocol	GB/T 18487.1-2015
DC Charging Gun	125A DC *2
Function	1.      LAN/WLAN/4G communication 2.     IC card/Apps/QR code payment 3.     Cloud management