4.8kwh Renewable Energy Pure off-Grid Standard Ess for Household

• Customization: Available
• Condition: New
• Certification: ISO
• Model NO.: GPESS-48100-302L-A
• Specification: 538*518*612 mm, 548*528*622 mm
• AC out Inverter Max Output Power: 3300W
• Battery Type: Lithium Battery
• Battery Voltage: 48V
• Battery Capacity: 100ah
• Weight: ≤165kg
• Transport Package: Carton
• Trademark: Goldpower
• Origin: Shenzhen
• HS Code: 8504401990
• Production Capacity: 1000000 Pieces

Product Description

GPESS-48100-302L-A portable energy storage system consists of AC CHARGER,DC CHARGER, AC(OUT) INVERTER,FRONT PANEL(Monitor unit), 4 modules, 2 groups 48V 50Ah lithium battery.

 

Input
Parameters		Min.	Typ.	Max.	Unit	Remark
DC CHARGER (PV)	Input voltage range	100		300	Vdc	Compatible with light energy, wind energy, DC generation 3 channels input, with MPPT, MPPT tracking accuracy is not less than 90%. Input 100V~ 150V, output current derating 26A, recovery voltage 154±5V
	Output rated voltage		48	57.6	Vdc
	Output current			32	A
	Output efficiency	85	88		%	Test with full load
AC CHARGER	Input voltage range	90	220	280	Vac	Input 149V ~ 154V, output current derating 26A. Recovery voltage 160± 5V
	Input rated voltage		120		Vac
	Input voltage frequency	57	60	63	Hz
	Power factor		0.99
	Output voltage		48	57.6	Vdc
	Output current			50	A
	Output efficiency	92			%	Test with full load

Output
Parameters		Min.	Typ.	Max.	Unit	Remark
AC(OUT) INVERTER OUTPUT	Output voltage range	115	120	125	Vac	Output max. power 3300W
	Output rated voltage		120		Vac
	Output voltage range	57	60	63	Hz
	Output current			30	A
	Output efficiency	86			%	Test with full load
AC bypass output	Output rated voltage	90		164	Vac	With the common inverter output. The mains will supply power to the equipment when the main is available. It will transfer to inverter output when no  mains input or mains over/ under voltage
	Output voltage frequency		60
	Output current			30	A
BAT+ BAT- (OUT)	Output voltage		48		Vdc	Battery direct output, with short circuit, current limiting protection.
	Output current		5		A
DC1+ DC2+ DC3+ GND (OUT)	Output voltage	Output interface voltage is same with the input PV voltage			Vdc	@PV input, PV input power is greater than DC CHARGER max power, willprovide the external output interface

Protection
Parameters		Min.	Typ.	Max.	Unit	Remark
Power Module	Over temperature  protection	The power supply module has the function of over temperature protection. When the main radiator temperature too high and up to over temperature protection set point, turn off the output, temperature hysteresis is about 10ºC
	Output over current protection	Each module of the power supply has the function of over power protection and short circuit protection.

Battery management function
Battery management	DC charging	With MPPT, use the maximum power to charge
	AC charging	AC constant current charging firstly, then constant voltage charging.
	Over/under voltage protection	Battery comes with BMS management.

Insulation rating
Parameter		Standard	Remark
DC CHARGER	Input- Chassis	2120Vdc/10mA/60S	No flashover, no breakdown, removed grounding screws when testing
	Input- Output	2120Vdc/10mA/60S
	Output- Chassis	710Vdc/10mA/60S
AC CHARGER	Input- Chassis	4240Vdc/10mA/60S	No flashover, no breakdown, removed grounding screws when testing
	Input- Output	2120Vdc/10mA/60S
	Output- Chassis	710Vdc/10mA/60S
AC(OUT) INVERTER	Input- Chassis	2121Vdc /10mA/60S	Withdraw the corresponding voltage for 1 minute, leakage current≤ 10mA, no breakdown or flashover phenomenon
	Input- Output	2121Vdc /10mA/60S
	Output- Chassis	750Vdc /10mA/60S
Insulation resistance		Under normal atmospheric pressure, relative humidity 90%,Testing voltage: 500v dc, insulation of input-output, input-ground, output-ground shall not be less than 10MΩ

Environment
Parameter	Min.	Typ.	Max.	Unit	Remark
Operating temperature	-10		40	°C
Extended operating temperature	-20		50	°C
Storage temperature	-10		60	°C
Relative humidity			90	%
Atmospheric pressure	70		106	KPa
Altitude	0		3000	m
Cooling mode	Fan cooling
Waterproof & dustproof	Under the following dust environment, the equipment can operate normally: Diameter> 5um, dust concentration≤3×10^4 grain /m3, Dust particles are non conductive, magnetic and corrosive. This product is without waterproof function.