Centralized Grow Light Power Supply Input: Three-Phase 347 ~ 528 VAC; Output: 200 ~ 800 VDC

• Customization: Available
• Usage: Light
• Output Type: Single
• Model NO.: GPNY40750A
• Circuit Structure: Rated Output Current:40A
• Certification: CE, RoHS
• Power Supply Mode: 2 Years Warranty
• In-Out: Output:200V-800V
• Power Supply Voltage: Input: Three-Phase 347 ~ 528 VAC
• Pack Sealing Size: SC-70
• Brand: Goldpower
• Specification: (Width, height and depth) 650mm 550mm 800mm
• Trademark: Goldpower
• Origin: China
• Production Capacity: 50000/Years

Product Description

GPNY40750A System Properties

Environment
Item	Min.	Typical	Max.	Unit	Remark
operating temperature	-20	25	50	°C
Extreme operating temperature	-30	25	55	°C	-30°C ~ -20°C can be started with load, extended temperature 50-55°C, and the module linearly reduced power output at 4% / °C
Humidity	5		95	%	Relative humidity without condensing
Altitude	0		2000	m

 

Input
Item	Min.	Typical	Max.	Unit	Remark
Input mode	Three phase five line				Note: The rectifier module has no middle line
Input voltage range	432	480	528	Vac
Max. input voltage			560	Vac	The module does not work at this input voltage, but it cannot be damaged
Max. input current			80	A	Low pressure, full load, per phase
Max. input power			44	KVA	Low pressure input, when full load output
Software start time	3		15	S	The nominal input voltage range of power up to the supply output voltage rises to the set value
Input power factor	>0.98				Rated input, full-load output
	>0.97				Rated input, half-load output
Input current harmonics	Total harmonics <5%				Rated input, full-load output
	Total harmonics  <10%				Rated input, half-load output
Ground way	Protect the power supply housing

Output
Item	Min.	Typical	Max.	Unit	Remark
Rated output voltage range	200		800	Vdc
Rated output current			40	A	20A * 2 Road
Output rating			40	KW
Stable pressure accuracy	-0.5		+0.5	%
Valid value of ripple			1	%
Dynamic response time			200	us
Dynamic response overflush	-0.5		+0.5	%
Efficiency			95	%
noise			65	dB(A)
System heat dissipation mode	air blast cooling

Protect
parameter	minimum	typical case	maximum	unit	explanatory note
Input over-stream protection	With the input overcurrent protection function, the input plastic shell circuit breaker is disconnected during protection.
Input overpressure protection	540		560	V
Enter the overvoltage protection recovery	530		540	V
Input under-pressure protection	415		428	V
Enter the undervoltage protection restore	428		432	V
Overtemperature protection of modules		56		°C
Output overpressure protection	1060		1080	V
Output short circuit protection	With output short circuit protection function